DODGE /CHRYSLER/JEEP 345 CI 5.7 L 2003-08 REMANIFACTURED
WITH MDS ENGINE W/O EGR
PLUS A CORE DEPOSIT OF 600.00
AND VIN NUMBER DUE PRIOR TO SHIPPING
YOUR REBUILDABLE CORE MUST BE RETURN WITH IN 30 DAYS FOR CORE DEPOSIT CREDIT TO BE RETURNED
SHIPPING ONE WAY TO A BUSINESS WITH LOADING DOCK OR FORKLIFT TO LOWER 48 ONLY
- We install 100% new pressed in & pinned valve seats to stop seats from dropping and damaging engines.
- We have eliminated the oil sludge issue by utilizing a newly engineered piston which brings the combustion chamber temperature back under control.
- We have corrected timing chain guide and tensioner failure with new design parts.
- We install a M.L.S. (multi layer steel) head gasket which stops premature head gasket failure from the high heat conditions this engine endures.
- We stand behind our engine with a 1 year unlimited mile warranty.
- INTAKE MANIFOLD NEEDS TO BE REPLACED AS PER MANUFACTURE(CHRYSLER) REQUIREMENT . FAILURE TO DO SO WILL CAUSE SEVERE DAMAGE TO THE NEW ENGINE AND WILL VOID THE WARRANTY
Description of long blocks.
All long blocks come with cylinder head(s) attached and valve train installed. Valve
covers, timing cover, intake manifold and oil pan
are not included.
All long blocks have, lifters, camshaft, timing chain (belt), timing gears, valve
guides ,three angle cut seats, cam, rod and main
bearings, pistons, piston rings, rod bushings (if applicable), gaskets and oil pump.
All cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and
shot peened and magnafluxed for cracks. All
bolt holes are tapped.
All oil galleys are hand brushed with white cleaning brushes and cylinders are hand
cleaned with cleaning solution .
Cylinder heads have seats cut three angle. After assembly, heads are vacuum
checked for valve seating.
Crankshafts are ground and polished . Each oil galley is hand brushed .
All connecting rods are honed.
ALL OUR REMANUFACTURED LONG BLOCKS MEET OR EXCEED ORIGINAL EQUIPMENT SPECIFICATIONS
Engines remanufactured by our remanufacturing line meet or exceed O.E.M. specifications.
– Cylinder heads are re-manufacturer
– Three angle cut valve seats
– All heads are cnc surfaced
– Blocks are bored, cylinder walls are honed
– Crankshafts are ground and polished
– Camshafts are ground to O.E.M. specifications, hardened and polished
– Connecting rods are resized to O.E.M. specifications
SUMMARY OF OUR ENGINE LIMITED WARRANTY:
Passenger car and light truck up to 1/2 ton long blocks are covered for 1 years or unlimited miles (Parts Only no labor ). If failure of a long block should occur during the first twelve months and it is determined the failure is due to a defect in workmanship or parts installed by united engine will replace or repair the defective unit to the original buyer.
Total Price for this Item is (Item price + shipping+ CORE = Total)
You may pay with Visa, Mastercard,
CORE POLICY : You have 30 days from date of original purchase to return a matching core (rebuildable). Cores must be complete will all its parts including rods, bolts, and must not be cracked. The crank must clear 20/20 and the block must clear .030 for refund. We required Three (3) Business Days to Inspect and to refund your Deposit. NO EXCEPTIONS
If this is not what you need we will be glad to rebuild one for you (800)675-1000