Description
HEAD STUD KIT
FORD 7.3
HEAD STUD KIT
FORD 7.3
UNITED ENGINE
SINCE 1978
DODGE /CHRYSLER/JEEP 345 CI 5.7 L 2003-08 REMANIFACTURED
W/O MDS ENGINE
ENGINE 2095.00
CORE DEPOSIT OF 600.00 DUE PRIOR TO SHIPPING
YOUR REBUILDABLE CORE MUST BE RETURN WITH IN 30 DAYS FOR CORE DEPOSIT CREDIT TO BE RETURNED
295.00 SHIPPING TO A BUSINESS WITH LOADING DOCK OR FORKLIFT TO LOWER 48 ONLY
Description of long blocks.
All long blocks come with cylinder head(s) attached and valve train installed. Valve covers, timing cover, intake manifold and oil pan are not included.
All long blocks have, lifters, camshaft, timing chain (belt), timing gears, valve guides ,three angle cut seats, cam, rod and main bearings, pistons, piston rings, rod bushings (if applicable), gaskets and oil pump.
All cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and shot peened and magnafluxed for cracks. All bolt holes are tapped.
All oil galleys are hand brushed with white cleaning brushes and cylinders are hand cleaned with cleaning solution .
Cylinder heads have seats cut three angle. After assembly, heads are vacuum checked for valve seating.
Crankshafts are ground and polished . Each oil galley is hand brushed .
All connecting rods are honed.
ALL OUR REMANUFACTURED LONG BLOCKS MEET OR EXCEED ORIGINAL EQUIPMENT SPECIFICATIONS
What are the engine specifications?
Engines remanufactured by our remanufacturing line meet or exceed O.E.M. specifications.
– New NPR pistons
– New NPR rings
– New S A gear timing gears and chain
– New Melling lifters
– New Melling oil pump
– New victor or coreteco gaskets
– Cylinder heads are pressure checked
– Three angle cut valve seats
– All head surfaces
– Blocks are bored, cylinder walls are honed
– Crankshafts are ground and polished
– Camshafts are ground to O.E.M. specifications, hardened and polished
– Connecting rods are resized to O.E.M. specifications
Block Toyota .020, .030 & .040
Crankshaft Toyota
Connecting Rods Toyota
Pistons Cast aluminum
Piston Rings N.P.R. molly piston rings
Camshaft Stock
Lifters Mechanical
Oil Pump Crank driven oil pump
Timing Set Timing set with new gears and rails
Bearings Aluminum rod & main bearings
Bearings Thrust bearings
Gaskets Complete gasket set
Heads Remanufactured . 3 angle valve job
Valves Cut and adjusted
Springs Checked for pressure
Machine Work
Block Bore and hone block with torque plate
Cylinder Walls Cylinder walls are sonic tested for thickness
Block Surface Surface block parallel to main line w/ CBN
Connecting Rods Re-size rods with torque to yield bolts & nuts
Connecting Rods Hang & align new pistons onto connecting rods
Main Line Align hone main line
Assemble Assemble long block
REBUILDING QUALITY ENGINES
SINCE 1978
(800) 675-1000
Or
(310) 886-3000
Toyota 1ZZ-FE 1998-2007
400.00 CORE DEPOSIT REQUIRED
Description of long blocks.
All long blocks come with cylinder head(s) attached and valve train installed. Valve
covers, timing cover, intake manifold and oil pan
are not included.
All long blocks have, lifters, camshaft, timing chain (belt), timing gears, valve
guides ,three angle cut seats, cam, rod and main
bearings, pistons, piston rings, rod bushings (if applicable), gaskets and oil pump.
All cylinder blocks, cylinder heads, crankshafts and connecting rods are cleaned and
shot peened and magnafluxed for cracks. All
bolt holes are tapped.
All oil galleys are hand brushed with white cleaning brushes and cylinders are hand
cleaned with cleaning solution .
Cylinder heads have seats cut three angle. After assembly, heads are vacuum
checked for valve seating.
Crankshafts are ground and polished . Each oil galley is hand brushed .
All connecting rods are honed.
ALL OUR REMANUFACTURED LONG BLOCKS MEET OR EXCEED ORIGINAL EQUIPMENT SPECIFICATIONS
Engines remanufactured by our remanufacturing line meet or exceed O.E.M. specifications.
– New NPR pistons (JAPAN)
– New NPR RINGS (JAPAN )
– New S A gear timing gears and chain(USA)
– New ITM oil pump
– New ITM OR EVERGREEN GASKET SET
– Cylinder heads are Rebuilt
– Three angle cut valve seats
– All heads are cnc surfaced
– Blocks are bored, cylinder walls are honed
– Crankshafts are ground and polished
– Camshafts are ground to O.E.M. specifications, hardened and polished
– Connecting rods are resized to O.E.M. specifications